Open source hyperconverged infrastructure (HCI) software Saturday, Dec 19, 2020

GitHUB SOURCE : https://github.com/rancher/harvester/

Rancher Harvester

Build Status

Rancher Harvester is an open source hyper-converged infrastructure (HCI) software built on Kubernetes. It is an open source alternative to vSphere and Nutanix.

harvester-ui

Overview

Harvester implements HCI on bare metal servers. Here are some notable features of the Harvester:

  1. VM lifecycle management including SSH-Key injection, Cloud-init and, graphic and serial port console
  2. Distributed block storage
  3. Multiple NICs connecting to the management network or VLANs
  4. ISO image repository
  5. Virtual Machine templates

The following diagram gives a high-level architecture of Harvester:

  • MinIO is a cloud storage server compatible with Amazon S3.
  • Longhorn is a lightweight, reliable and easy-to-use distributed block storage system for Kubernetes.
  • KubeVirt is a virtual machine management add-on for Kubernetes.
  • K3OS is a Linux distribution designed to remove as much OS maintenance as possible in a Kubernetes cluster. The OS is designed to be managed by kubectl.

Hardware Requirements

To get the Harvester server up and running the following minimum hardware is required:

Type Requirements
CPU 4 cores minimum, 16 cores or above preferred
Memory 8 GB minimum, 32 GB or above preferred
Disk 120 GB minimum, 500 GB or above preferred
Network Card 1 Gbps Ethernet minimum, 10Gbps Ethernet recommended
Network Switch Trunking of ports required for VLAN support

Installation

Harvester supports two modes of installation:

Bare-metal

In the Bare-metal mode, users can use the ISO to install Harvester directly on the bare-metal server to form a Harvester cluster. Users can add one or many compute nodes to join the existing cluster.

To get the Harvester ISO, download it from the Github releases.

During installation you can either choose to form a new cluster, or join the node to an existing cluster.

Note: This video shows a quick overview of the ISO installation.

  1. Mount the Harvester ISO disk and boot the server by selecting the Harvester Installer. iso-install.png
  2. Choose the installation mode by either creating a new Harvester cluster, or by joining an existing one.
  3. Choose the installation device that the Harvester will be formatted to.
  4. Configure the cluster token. This token will be used for adding other nodes to the cluster.
  5. Configure the login password of the host. The default ssh user is rancher.
  6. (Optional) you can choose to import SSH keys from a remote URL server. Your GitHub public keys can be used with https://github.com/<username>.keys.
  7. Select the network interface for the management network.
  8. (Optional) If you need to use an HTTP proxy to access the outside world, enter the proxy URL address here, otherwise, leave this blank.
  9. (Optional) If you need to customize the host with cloud-init config, enter the HTTP URL here.
  10. Confirm the installation options and the Harvester will be installed to your host. The installation may take a few minutes to be complete.
  11. Once the installation is complete it will restart the host and a console UI with management URL and status will be displayed. (You can Use F12 to switch between Harvester console and the Shell) iso-installed.png

App [Development Mode]

In the App mode, the user can deploy Harvester using Helm to an existing Kubernetes cluster.

Note: Hardware-assisted virtualization must be supported on the Kubernetes nodes.

Documentation

Please refer to the following documentation to find out more details:

Demo: Check out this demo to get a quick overview of the Harvester UI.

Source code

Harvester is 100% open-source software. The project source code is spread across a number of repos:

Name Repo Address
Harvester https://github.com/rancher/harvester
Harvester UI https://github.com/rancher/harvester-ui
Harvester Installer https://github.com/rancher/harvester-installer
Harvester Network Controller https://github.com/rancher/harvester-network-controller

Check out this demo to get a quick overview of the Harvester UI.

Community

If you need any help with Harvester, please join us at either our Rancher forums or Slack where most of our team hangs out at.

If you have any feedback or questions, feel free to file an issue.

License

Copyright (c) 2020 Rancher Labs, Inc.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Unauthorized reproduction of this site is prohibited, and offenders will be held accountable for their legal responsibilities.
Article Title: Open source hyperconverged infrastructure (HCI) software
This article URL:Open source hyperconverged infrastructure (HCI) software

All Categories

Github Trending Repositories

Explore Github Trending Repositories. See what the GitHub community is most excited about today.

Copyright 2010 - 2020